View 74HCT3G04_18971.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
DATA SHEET
74HC3G04; 74HCT3G04 Inverter
Product specification Supersedes data of 2002 Jul 26 2003 Oct 30
Philips Semiconductors
Product specification
Inverter
FEATURES * Wide supply voltage range from 2.0 to 6.0 V * Symmetrical output impedance * High noise immunity * Low power dissipation * Balanced propagation delays * Very small 8 pins package * Output capability: standard * ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf 6.0 ns. DESCRIPTION
74HC3G04; 74HCT3G04
The 74HC3G/HCT3G04 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). Specified in compliance with JEDEC standard no. 7. The 74HC3G/HCT3G04 provides three inverting buffers.
TYPICAL SYMBOL tPHL/tPLH CI CPD Notes 1. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = total switching outputs; (CL x VCC2 x fo) = sum of outputs. 2. For HC3G04 the condition is VI = GND to VCC. For HCT3G04 the condition is VI = GND to VCC - 1.5 V. FUNCTION TABLE See note 1. INPUT nA L H Note 1. H = HIGH voltage level; L = LOW voltage level. OUTPUT nY H L PARAMETER propagation delay nA to nY input capacitance power dissipation capacitance per buffer notes 1 and 2 CONDITIONS HC3G04 CL = 50 pF; VCC = 4.5 V 8 1.5 9 HCT3G04 10 1.5 9 ns pF pF UNIT
2003 Oct 30
2
Philips Semiconductors
Product specification
Inverter
ORDERING INFORMATION PACKAGE TYPE NUMBER TEMPERATURE RANGE 74HC3G04DP 74HCT3G04DP 74HC3G04DC 74HCT3G04DC PINNING PIN 1 2 3 4 5 6 7 8 1A 3Y 2A GND 2Y 3A 1Y VCC SYMBOL data input 1A data output 3Y data input 2A ground (0 V) data output 2Y data input 3A data output 1Y supply voltage -40 to +125 C -40 to +125 C -40 to +125 C -40 to +125 C PINS 8 8 8 8 PACKAGE TSSOP8 TSSOP8 VSSOP8 VSSOP8
74HC3G04; 74HCT3G04
MATERIAL plastic plastic plastic plastic
CODE SOT505-2 SOT505-2 SOT765-2 SOT765-2
MARKING H04 T04 H04 T04
DESCRIPTION
handbook, halfpage
handbook, halfpage
1A 1 3Y 2
8 VCC 7 1Y 3A 2Y
1
1A
1Y
7
04
2A GND 3 4
MNA719
3
2A
2Y
5
6 5
6
3A
3Y
2
MNA720
Fig.1 Pin configuration.
Fig.2 Logic symbol.
2003 Oct 30
3
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
handbook, halfpage
1
1
7
3
1
5
handbook, halfpage
A
Y
MNA110
6
1
2
MNA721
Fig.3 IEC logic symbol.
Fig.4 Logic diagram (one driver).
2003 Oct 30
4
Philips Semiconductors
Product specification
Inverter
RECOMMENDED OPERATING CONDITIONS 74HC3G04 SYMBOL VCC VI VO Tamb PARAMETER supply voltage input voltage output voltage operating ambient temperature input rise and fall times CONDITIONS MIN. 2.0 0 0 see DC and AC -40 characteristics per device VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V - - - TYP. 5.0 - - +25
74HC3G04; 74HCT3G04
74HCT3G04 UNIT MIN. 4.5 0 0 -40 TYP. 5.0 - - +25 MAX. 5.5 VCC VCC +125 V V V C
MAX. 6.0 VCC VCC +125
tr, tf
- 6.0 -
1000 500 400
- - -
- 6.0 -
- 500 -
ns ns ns
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL VCC IIK IOK IO ICC Tstg PD Notes 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Above 110 C the value of PD derates linearly with 8 mW/K. PARAMETER supply voltage input diode current output diode current output source or sink current VCC or GND current storage temperature power dissipation Tamb = -40 to +125 C; note 2 VI < -0.5 V or VI > VCC + 0.5 V; note 1 VO < -0.5 V or VO > VCC + 0.5 V; note 1 -0.5 V < VO < VCC + 0.5 V; note 1 note 1 CONDITIONS MIN. -0.5 - - - - -65 - MAX. +7.0 20 20 25 50 +150 300 UNIT V mA mA mA mA C mW
2003 Oct 30
5
Philips Semiconductors
Product specification
Inverter
DC CHARACTERISTICS
74HC3G04; 74HCT3G04
Type 74HC3G04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VIH HIGH-level input voltage 2.0 4.5 6.0 VIL LOW-level input voltage 2.0 4.5 6.0 VOH HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -20 A IO = -20 A IO = -4.0 mA IO = -5.2 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 20 A IO = 20 A IO = 4.0 mA IO = 5.2 mA ILI ICC input leakage current quiescent supply current VI = VCC or GND VI = VCC or GND; IO = 0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 - - - - - - - 0 0 0 0.15 0.16 - - 0.1 0.1 0.1 0.26 0.26 0.1 1.0 V V V V V A A 2.0 4.5 6.0 4.5 6.0 1.9 4.4 5.9 4.18 5.68 2.0 4.5 6.0 4.32 5.81 - - - - - V V V V V 1.5 3.15 4.2 - - - 1.2 2.4 3.2 0.8 2.1 2.8 - - - 0.5 1.35 1.8 V V V V V V PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT
2003 Oct 30
6
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 to +85 C VIH HIGH-level input voltage 2.0 4.5 6.0 VIL LOW-level input voltage 2.0 4.5 6.0 VOH HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -20 A IO = -20 A IO = -4.0 mA IO = -5.2 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 20 A IO = 20 A IO = 4.0 mA IO = 5.2 mA ILI ICC input leakage current quiescent supply current VI = VCC or GND VI = VCC or GND; IO = 0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 - - - - - - - - - - - - - - 0.1 0.1 0.1 0.33 0.33 1.0 10 V V V V V A A 2.0 4.5 6.0 4.5 6.0 1.9 4.4 5.9 4.13 5.63 - - - - - - - - - - V V V V V 1.5 3.15 4.2 - - - - - - - - - - - - 0.5 1.35 1.8 V V V V V V VCC (V) MIN. TYP. MAX. UNIT
2003 Oct 30
7
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 to +125 C VIH HIGH-level input voltage 2.0 4.5 6.0 VIL LOW-level input voltage 2.0 4.5 6.0 VOH HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -20 A IO = -20 A IO = -4.0 mA IO = -5.2 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 20 A IO = 20 A IO = 4.0 mA IO = 5.2 mA ILI ICC input leakage current quiescent supply current VI = VCC or GND VI = VCC or GND; IO = 0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 - - - - - - - - - - - - - - 0.1 0.1 0.1 0.4 0.4 1.0 20 V V V V V A A 2.0 4.5 6.0 4.5 6.0 1.9 4.4 5.9 3.7 5.2 - - - - - - - - - - V V V V V 1.5 3.15 4.2 - - - - - - - - - - - - 0.5 1.35 1.8 V V V V V V VCC (V) MIN. TYP. MAX. UNIT
2003 Oct 30
8
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
Type 74HCT3G04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VIH VIL VOH HIGH-level input voltage LOW-level input voltage HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -4.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 4.0 mA ILI ICC ICC input leakage current quiescent supply current additional supply current per input VI = VCC or GND VI = VCC or GND; IO = 0 VI = VCC - 2.1 V; IO = 0 4.5 4.5 5.5 5.5 4.5 to 5.5 - - - - - 0 0.15 - - - 0.1 0.26 0.1 1.0 300 V V A A A 4.5 4.5 4.4 4.18 4.5 4.32 - - V V 4.5 to 5.5 4.5 to 5.5 2.0 - 1.6 1.2 - 0.8 V V PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT
Tamb = -40 to +85 C VIH VIL VOH HIGH-level input voltage LOW-level input voltage HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -4.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 4.0 mA ILI ICC ICC input leakage current quiescent supply current additional supply current per input VI = VCC or GND VI = VCC or GND; IO = 0 VI = VCC - 2.1 V; IO = 0 4.5 4.5 5.5 5.5 4.5 to 5.5 - - - - - - - - - - 0.1 0.33 1.0 10 375 V V A A A 4.5 4.5 4.4 4.13 - - - - V V 4.5 to 5.5 4.5 to 5.5 2.0 - - - - 0.8 V V
2003 Oct 30
9
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 to +125 C VIH VIL VOH HIGH-level input voltage LOW-level input voltage HIGH-level output voltage VI = VIH or VIL IO = -20 A IO = -4.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 20 A IO = 4.0 mA ILI ICC ICC input leakage current quiescent supply current additional supply current per input VI = VCC or GND VI = VCC or GND; IO = 0 VI = VCC - 2.1 V; IO = 0 4.5 4.5 5.5 5.5 4.5 to 5.5 - - - - - - - - - - 0.1 0.4 1.0 20 410 V V A A A 4.5 4.5 4.4 3.7 - - - - V V 4.5 to 5.5 4.5 to 5.5 2.0 - - - - 0.8 V V VCC (V) MIN. TYP. MAX. UNIT
2003 Oct 30
10
Philips Semiconductors
Product specification
Inverter
AC CHARACTERISTICS Type 74HC3G04 GND = 0 V; tr = tf 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL Tamb = 25 C tPHL/tPLH propagation delay nA to nY see Figs 5 and 6 2.0 4.5 6.0 tTHL/tTLH output transition time see Figs 5 and 6 2.0 4.5 6.0 Tamb = -40 to +85 C tPHL/tPLH propagation delay nA to nY see Figs 5 and 6 2.0 4.5 6.0 tTHL/tTLH output transition time see Figs 5 and 6 2.0 4.5 6.0 Tamb = -40 to +125 C tPHL/tPLH propagation delay nA to nY see Figs 5 and 6 2.0 4.5 6.0 tTHL/tTLH output transition time see Figs 5 and 6 2.0 4.5 6.0 PARAMETER WAVEFORMS VCC (V)
74HC3G04; 74HCT3G04
MIN.
TYP.
MAX.
UNIT
- - - - - - - - - - - - - - - - - -
22 8 6 18 6 5 - - - - - - - - - - - -
75 15 13 75 15 13
ns ns ns ns ns ns
90 18 16 95 19 16
ns ns ns ns ns ns
110 22 20 125 25 20
ns ns ns ns ns ns
2003 Oct 30
11
Philips Semiconductors
Product specification
Inverter
Type 74HCT3G04 GND = 0 V; tr = tf 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL Tamb = 25 C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 5 and 6 output transition time see Figs 5 and 6 4.5 4.5 - - - - - - PARAMETER WAVEFORMS VCC (V)
74HC3G04; 74HCT3G04
MIN.
TYP.
MAX.
UNIT
10 6 - - - -
18 15
ns ns
Tamb = -40 to +85 C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 5 and 6 output transition time see Figs 5 and 6 4.5 4.5 23 19 ns ns
Tamb = -40 to +125 C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 5 and 6 output transition time see Figs 5 and 6 4.5 4.5 29 22 ns ns
AC WAVEFORMS
V handbook, halfpage I nA input GND t PHL VOH nY output VOL t THL VM VM
10%
VM
VM
t PLH
90%
t TLH
MNA722
For HC3G: VM = 50%; VI = GND to VCC. For HCT3G: VM = 1.3 V; VI = GND to 3.0 V.
Fig.5 The input (nA) to output (nY) propagation delays and the output transition times.
2003 Oct 30
12
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
handbook, full pagewidth
S1 VCC PULSE GENERATOR VI D.U.T. RT CL = 50 pF
MNA742
VCC open GND
RL = VO 1 k
TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH open VCC GND
S1
Definitions for test circuit: CL = load capacitance including jig and probe capacitance. RT = termination resistance should be equal to the output impedance Zo of the pulse generator.
Fig.6 Load circuitry for switching times.
2003 Oct 30
13
Philips Semiconductors
Product specification
Inverter
PACKAGE OUTLINES
74HC3G04; 74HCT3G04
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
SOT505-2
D
E
A
X
c y HE vMA
Z
8
5
A pin 1 index
A2 A1
(A3)
Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.15 0.00 A2 0.95 0.75 A3 0.25 bp 0.38 0.22 c 0.18 0.08 D(1) 3.1 2.9 E(1) 3.1 2.9 e 0.65 HE 4.1 3.9 L 0.5 Lp 0.47 0.33 v 0.2 w 0.13 y 0.1 Z(1) 0.70 0.35 8 0
Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC --JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16
2003 Oct 30
14
Philips Semiconductors
Product specification
Inverter
74HC3G04; 74HCT3G04
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A X
c y HE vMA
Z
8
5
Q A pin 1 index A2 A1 (A3) Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1 A1 0.15 0.00 A2 0.85 0.60 A3 0.12 bp 0.27 0.17 c 0.23 0.08 D(1) 2.1 1.9 E(2) 2.4 2.2 e 0.5 HE 3.2 3.0 L 0.4 Lp 0.40 0.15 Q 0.21 0.19 v 0.2 w 0.13 y 0.1 Z(1) 0.4 0.1 8 0
Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 REFERENCES IEC JEDEC MO-187 JEITA EUROPEAN PROJECTION
ISSUE DATE 02-06-07
2003 Oct 30
15
Philips Semiconductors
Product specification
Inverter
DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development
74HC3G04; 74HCT3G04
DEFINITION This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
II
Preliminary data Qualification
III
Product data
Production
Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2003 Oct 30
16
Philips Semiconductors - a worldwide company
Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
(c) Koninklijke Philips Electronics N.V. 2003
SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613508/02/pp17
Date of release: 2003
Oct 30
Document order number:
9397 750 10568

▲Up To Search▲

Price & Availability of 74HCT3G04

	To Download 74HCT3G04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .